#####################################
# THIS IS NOT A COMPLETE APACHE CONFIG FILE!!!!
#####################################

#####################################
# What is it then? It's just an example of the 
# kind of virtualhost section you're going to
# want to have. Edit the following stuff as
# needed, and then plug it into your httpd.conf.
#####################################

# Put your IP here
NameVirtualHost __SERVER_IP__

<VirtualHost __SERVER_IP__>
  ServerName __SERVER_NAME__
  DocumentRoot /www/scoop/html
  ErrorLog __ERROR_LOG__ 
  CustomLog __CUSTOM_LOG combined

  UserDir disabled

  ##################################
  # Edit these variables to match your 
  # local setup. Note that this is now the 
  # *only* place you need to enter this
  # stuff.
  ##################################

  # Edit the path below to point to your scoop lib/ directory
  <perl>
    use lib qw( /www/scoop/lib );
  </perl>
  
  # Apache::Watchdog::RunAway configs:
  # For more info on these, read perldoc Apache::Watchdog::RunAway
  # The names of these vars correspond to the ones in those documents.
  # Most of the defaults should work ok. Edit paths where necessary
  # NOTE: These only need to appear once per *server*. If you do multiple
  # virtual hosts on one apache, you should cut the rest of this 
  # (until </VirtualHost>) after them first one
  # Note: people have a lot of problems with this. If you
  # can get Apache::Scoreboard to compile, go ahead and set this up.
  # Otherwise, leave it off.
  #<perl>
  #  use Apache::Watchdog::RunAway;
  #  $Apache::Watchdog::RunAway::TIMEOUT        = 80;
  #  $Apache::Watchdog::RunAway::POLLTIME       = 5;
  #  $Apache::Watchdog::RunAway::DEBUG          = 0;
  #  $Apache::Watchdog::RunAway::LOCK_FILE      = '/tmp/safehang.lock';
  #  $Apache::Watchdog::RunAway::LOG_FILE       = '/usr/local/apache/logs/watchdog.log';
  #  $Apache::Watchdog::RunAway::SCOREBOARD_URL = 'http://scoop.mysite.org/scoreboard';
  #</perl>

  
  <Location />
	# Pick which Database you're using
	# The only Current DB supported is mySQL
	PerlSetVar DBType mySQL
	# PerlSetVar DBType Oracle
	# PerlSetVar DBType postgres
	# PerlSetVar DBType mSQL
	# PerlSetVar DBType Sybase
    
	##  One MySQL specific Thing:
	# Set the version of mysql you're using
	# this is here to preserve compatibility with
	# 3.22, 3.23, 4.0x, and 4.1x. Needs to be one of these values:
	# 3.22 - DEPRECATED If you're running MySQL 3.22, you really should
	#		    upgrade.
	# 3.23 - older stable version
	# 4.0  - current stable version
	# 4.1  - developement version
	#
	# If you set mysql_version to 4.0 or 4.1, Scoop will use some of the
	# newer mysql features that are NOT present in MySQL 3.23.x. If you are
	# not running MySQL 4.x, set this var to 3.23 (or 3.22 as appropriate),
	# and Scoop will ignore them. Do not try to use the 4.x features in
	# 3.23 or 3.22, because they will not work!

	PerlSetVar mysql_version __MYSQL_VER__
	############################
	
	##  Some Oracle Specific stuff:
	# Standard ORACLE_HOME Env
	# PerlSetVar ORACLE_HOME /oraexe/app/oracle/product/8.1.5

	# Schema information for Oracle
	# if you're going to be using a different login and no aliasing
	# if you're not sure that you need this, ask your DBA
	# PerlSetVar Schema scoop
	############################

	# Database Config:
	# The name of your scoop Database
	# will become 'TWO_TASK' ENV if Oracle
	PerlSetVar db_name __DBNAME__

	# The host where mySQL is running
	PerlSetVar db_host __DBHOST__

	# The user to connect as
	PerlSetVar db_user __DBUSER__

	# That user's database password
	PerlSetVar db_pass __DBPASS__
    
    	# Archive config:
	# Set these vars if you use an archive database
	#PerlSetVar db_name_archive __DBNAMEARCHIVE__ 

    	# The host where mySQL is running
    	#PerlSetVar db_host_archive __DBHOSTARCHIVE__

   	# The user to connect as
    	#PerlSetVar db_user_archive __DBUSERARCHIVE__

    	# The user's database password
    	#PerlSetVar db_pass_archive __DBPASSARCHIVE__

	# Memcached config
	# Set 'memcached_servers' to the address and port of where your
	# memached servers are running. If you have more than one, separate
	# them with commas. Ex: 127.0.0.1:11211
	#PerlSetVar memcached_servers	127.0.0.1:11211
	# Set 'memcached_compress' to your desired level of compression it
	# will use. We have 10_000 here as a reasonalbe default
	#PerlSetVar memcached_compress	10_000

        # Slave Config
        # Set this if you're using a slave db
        #PerlSetVar db_name_slave __SLAVENAME__

        # the slave host. If you have more than one, seperate them with
        # commas: i.e., 1.2.3.4,1.2.3.5,1.2.3.6
        #PerlSetVar db_host_slave __SLAVEHOST__

        # slave db user
        #PerlSetVar db_user_slave __SLAVEUSER__

        # slave db pass
        #PerlSetVar db_pass_slave __SLAVEPASS__

        # Archive Slave Config
        # Set this if you're using a slave archive db
        #PerlSetVar db_name_slave_arch 	__SLAVENAMEARCH__

        # the slave host. If you have more than one, seperate them with
        # commas: i.e., 1.2.3.4,1.2.3.5,1.2.3.6
        #PerlSetVar db_host_slave_arch	__SLAVEHOSTARCH__

        # slave db user
        #PerlSetVar db_user_slave_arch	__SLAVEUSERARCH__

        # slave db pass
        #PerlSetVar db_pass_slave_arch 	__SLAVEPASSARCH__


    # Set below to your host name if you're
	# using a two-server proxy type system.
	# It will let the mod_perl server know what 
	# name it's supposed to go by. Most will just leave 
	# this alone.
	#PerlSetVar mailname www.mysite.com

	# This is the path to the VERSION file in scoop, will be
	# used with op=stats eventually
	# note: __URL_PATH__ will be '/' for vhost installs, and
	# '/yourpath' for a location install
    <perl>
      my $vfile = '/www/scoop/VERSION';
      my $v = do $vfile;
      push(@{ $Location{'__URL_PATH__'}->{PerlSetVar} },
         [ scoop_version  => $v->{Version}  ],
         [ scoop_date     => $v->{Date}     ],
		 [ scoop_revision => $v->{Revision} ],
         [ scoop_author   => $v->{Author}   ],
	     [ scoop_state    => $v->{State}    ]
	  );
    </perl>

	# Cookie config-- put the host name for cookie targeting here.
	# Note that it *must* have at least 2 dots-- so to send
	# cookies to any host in 'foo.org', enter ".foo.org"
	PerlSetVar cookie_host __COOKIE_HOST__

	# Mail::Sendmail Config-- enter your SMTP host here
	PerlSetVar SMTP __SMTP_SERVER__

	# Enter a "site id" below-- Any string is fine, just
	# make sure it's unique for this partuclar site.
	PerlSetVar site_id __SITE_ID__

    # Enter a site key below. This is used as the key for
	# some Blowfish encrypted form variables, which are 
	# used to prevent IP spoofing. It can be as long as you 
	# like, and needs to be as unguessable as possible.
	# DO NOT USE AN OBVIOUS VALUE! A bunch of quasi-random
	# characters will do.
	# ex: mmDfhbT4837%jQQaamOF0)(#??/Q
	PerlSetVar site_key __SITE_KEY__
	
	# Enter the number of stories to cache in memory below.
	# If you have a lot of memory, caching more stories
	# will improve performance.
	#PerlSetVar cache_stories 20 <-- not used yet

	# DB Failure page. This page will be displayed if the db
	# goes away instead of the usual "Internal Server Error" page.
	# By default, it lives in /pages/dbdown.html. An example is provided.
 	PerlSetVar dbdown_page /pages/dbdown.html
	
	# Linkpoint cc processing settings.
	# See doc/Linkpoint.howto for instructions.
	# If you're not using the Linkpoint payment system,
	# just leave these commented out.
	#PerlSetVar linkpt_host     secure.linkpt.net
	#PerlSetVar linkpt_port     1139
	#PerlSetVar linkpt_store    xxxxxx
	#PerlSetVar linkpt_keyfile  /www/scoop/lib/LPERL/xxxxxx.pem
	#PerlSetVar lbin_location   /www/scoop/lib/LPERL/lbin
	#PerlSetVar lbin_tmp_dir    /www/scoop/cctmp
	
	# Make sure this path points to the relevant file
	PerlRequire /www/scoop/etc/startup.pl

    SetHandler perl-script
    PerlHandler Scoop::ApacheHandler
  </Location>

  <Location /images>
    SetHandler default-handler
  </Location>

  <Location /pages>
    SetHandler default-handler
  </Location>

  <Location ~ "^/(robots\.txt|favicon\.ico)$">
    SetHandler default-handler
  </Location>

  # Edit the IP in "allow from" to match your host's IP
  #PerlModule Apache::Scoreboard
  #<Location /scoreboard>
  #  SetHandler perl-script
  #  PerlHandler Apache::Scoreboard::send
  #  order deny,allow
  #  deny from all
  #  allow from __SERVER_IP__
  #</Location>

</VirtualHost>